Irrigation consumes considerable water to satisfy the current food demand. An improvement in water use efficiency for irrigation is essential. Wind drift and evaporation losses reduce the water use efficiency of center pivot irrigation systems in arid and semi-arid areas. In this paper, a model of water vapor dynamics during and after overhead sprinkler irrigation was developed and validated by...

The radial water distribution and irrigation performance of an agricultural sprinkler with plastic nozzles were analysed. Twenty-six tests with an isolated sprinkler corresponding to different combinations of three working pressure (p, 200, 300 and 400 kPa) and three nozzle diameters of the main nozzle (4.0, 4.5 and 5.0 mm) were performed to evaluate the radial water distribution curves, All th...

The water use efficiency under conventional flood method of irrigation, which is predominantly practised in Indian agriculture, is very low due to substantial conveyance and distribution losses. Recognizing the fast decline of irrigation water potential and increasing demand for water from different sectors, a number of demand management strategies and programmes have been introduced to save wa...

The relative reduction in potential ground-water contamination due to pesticides at several sites in Utah was determined by comparing alternative irrigation system designs, water management practices and pesticides. Alternative sprinkler irrigation distribution coefficients were used to estimate infiltration depths. The movement of pesticides through soils following sprinkler irrigations was si...

Furrow irrigation detaches and transports soil particles and subsequently nutrients such as phosphorus (P). To reduce the risk of erosion and offsite P movement, producers can convert from furrow to sprinkler irrigation. We completed research on soil P dynamics in furrow versus sprinkler irrigated soils from four paired fields in south central Idaho. Surface soils (0-2.5 inches) were obtained f...

In this work, applications of the coupled solid set sprinkler irrigation and crop model AdorSim introduced in the companion paper are presented. The sprinkler irrigation model is based on ballistic theory, while the crop model is based on CropWat. AdorSim was used to evaluate the effect of sprinkler spacing on seasonal irrigation water use (WU) and crop yield. The most relevant results were rel...

The Complete fluidic sprinkler was originally created by China. Irrigation uniformity in no-wind conditions was studied in this paper. Radial water distribution for complete fluidic sprinkler type 10 was got by experiment. MATLAB was used to establish computation program to change the radial data into net data. Three-dimensional water distribution figures for single sprinkler and combined sprin...

A proper understanding of factors affecting evaporation and drift losses in sprinkle irrigation is important for developing water conservation strategies. For estimating drift and evaporation losses during the set sprinkler irrigation event, several outdoor single-sprinkler and block irrigation tests have been conducted. Various sprinkler±nozzle±riser height combinations were used and the varia...

This study investigates which factors may influence producers’ use of irrigation technologies and/or water management practices (WMPs). One major finding is that Arkansas producers are more likely to rely on WMPs instead of sprinkler irrigation as a response to changes in depth to water and drought occurrences. This finding highlights the importance of expanding the existing literature that foc...